The warning light is an alert message to the driver that there may be a loss of air pressure from one or more of the vehicle’s tyres. It comes from the Tyre Pressure Monitoring System (TPMS), an active safety technology that has become a legal requirement for all newly launched and factory updated passenger cars sold in Europe since November 406 posts · Joined 2021. #2 · Feb 21, 2022. You need to pump the tyres up to the required PSI/Bar, then in the car menu settings - Driving - Vehicle and then touch reinitialize tyre pressure. It should then switch off once done. I have had a couple of occasion where I have had new tyres and I have had to reinitialize it a couple of times to #500x #tpms #tmm #diytaj #carcommunity #carhacks #howtodoit #easyfix #carcommunity #CommissionsEarned #ad #diy #tajmotormedicsFiat 500 X 2015 First Generatio 2. Unscrew the valve stem cap from the valve stem on the tire. The valve stem is a black or silver pencil-sized extension near the hubcap, about 1" (2-3 cm) long. 3. Press the air pressure gauge evenly onto the valve stem and record the reading given. A Tire Pressure Monitoring System (TPMS) light in your dashboard comes on when your tire pressure becomes too low or too high. When this happens, you should pull over and gauge all your tires to determine which tires are improperly inflated. Add or remove air accordingly until your tire has reached the manufacturer’s recommended level. . Tyre pressure init. at stop. The message is displayed during driving. If you want to reset the pressure of the four tyres, stop the vehicle. 1. Tyre pressure init. long press. To reset the pressure of the four tyres, with the vehicle stopped, press and hold the 5 OK switch to launch resetting until the “If pressure OK [hold on]” message is 2010-2019 Fiat 500 TPMS Tyre Pressure Warning Light Reset Guide – The Fiat 500 is a compact car inspired by the 1957 Fiat 500. The classic 500 was known as the Nuova 500. The new Fiat 500 has been in production since 2007. This Fiat 500 is built in Tychy (Poland), where the Fiat Panda and Ford Ka are also made. Each tyre must have the correct amount of air within for it to work properly. The recommended tyre pressure of your vehicle is found in your owner's manual or on the tyre placard. While the standard is between 32-38 PSI, tyre pressure also depends on how heavy your car is, your driving style and the terrain you frequently drive on. If all seems OK then just put a couple of extra pounds of pressure in each tyre, do the reset and go for a drive for 3 or 4 miles. If all OK reset the tyre pressure to the correct settings. Reset the vehicle again and that should be it sorted. If it comes back for no reason then one of the sensors is faulty. The Tire Pressure indicator light does not immediately turn off when you adjust tire pressure. After inflating the tire to the recommended pressure, you must drive over 15 mph (25 km/h) for a short amount of time to activate the Tire Pressure Monitoring System (TPMS), which turns off the Tire Pressure indicator light.

check tyre pressure level reset required fiat tipo